ANALYSIS OF NEGATIVE SEQUENCE COMPENSATION-BASED UNBALANCE CONTROL IN DISTRIBUTED ENERGY RESOURCES INTERFACING INVERTERS

Zhixin Miao, Alexander Domijan, and Lingling Fan

References

  1. [1] F. Peng, Y. Li, and L.M. Tolbert, Control and protection ofpower electronics interfaced distributed generation systems ina customer-driven microgrid, Proc. of IEEE Power and EnergySociety General Meeting, Calgary, Canada, 2009.
  2. [2] H. Song and K. Nam, Dual current control scheme for PWMconverter under unbalanced input voltage conditions, IEEETransactions on Industrial Electronics, 46(5), 1999, 953–959.
  3. [3] A. Yazdani and R. Iravani, A unified dynamic model andcontrol for the voltage-sourced converter under unbalancedgrid conditions, IEEE Transactions on Power Delivery, 21(3),2006, 1620–1629.
  4. [4] J. Hu and Y. He, Modeling and control of grid-connectedvoltage-source converters under generalized unbalanced oper-ation conditions, IEEE Transactions on Energy Conversion,23(3), 2008, 903–913.
  5. [5] C. Hochgraf and R. Lasseter, STATCOM controls for opera-tion with unbalanced voltages, IEEE Transactions on PowerDelivery, 13(2), 1998, 538–544.
  6. [6] B. Blazic and I. Papic, Improved D-Statcom control for opera-tion with unbalanced currents and voltages, IEEE Transactionson Power Delivery, 21(1), 2006, 225–231.
  7. [7] K. Li, J. Liu, Z. Wang, and B. Wei, Strategies and oper-ating point optimization of STATCOM control for voltageunbalance mitigation in three-phase three-wire systems, IEEETransactions on Power Delivery, 22(1), 2007, 413-422.
  8. [8] Q. Song and W. Liu, Control of a cascade STATCOM with starconfiguration under unbalanced conditions, IEEE Transactionson Power Electronics, 24(1), 2009, 45–48.
  9. [9] G. Escobar, A. Stankovic, and P. Mattavelli, An adaptive con-troller in stationary reference frame for D-STATCOM in unbal-anced operation, IEEE Transactions on Industrial Electronics,51(2), 2004, 401–409.
  10. [10] A. Leon, J. Mauricio, J. Solsona, and A. Gomez-Exposito,Software sensor-based STATCOM control under unbalancedconditions, IEEE Transactions on Power Delivery, 24(3), 2009,1623–1632.
  11. [11] Y. Li, D. Vilathgamuwa, and P. Loh, A grid-interfacing powerquality compensator for three-phase three-wire microgrid ap-plications, IEEE Transactions on Power Electronics, 21(4),2006, 1021–1031.
  12. [12] Y. Li, D. Vilathgamuwa, and P. Loh, Microgrid power qualityenhancement using a three-phase four-wire grid-interfacingcompensator, IEEE Transactions on Industry Applications,41 (6), 2006, 1707–1719.
  13. [13] M. Hojo, Y. Iwase, T. Funabashi, and Y. Ueda, A methodof three-phase balancing in microgrid by photovoltaic gener-ation systems, 13th Power Electronics and Motion ControlConference (EPE-PEMC), 2008.
  14. [14] C. Sao and P. Lehn, Voltage balancing of converter fed micro-grids with single phase loads, Proc. IEEE Power and EnergySociety General Meeting, Pittsburgh, PA, 2008.
  15. [15] N. Benavides and P. Chapman, Modeling the effect of voltageripple on the power output of photovoltaic modules, IEEETransactions on Industrial Electronics, 55(7), 2008, 2638–2643.
  16. [16] D. Xiang, L. Ran, P.J. Tavner, and S. Yang, Control of adoubly fed induction generator in a wind turbine during gridfault ride-through, IEEE Transactions on Energy Conversion,21(3), 2006, 652–662.
  17. [17] L. Xu and Y. Wang, Dynamic modeling and control of DFIG-based wind turbines under unbalanced network conditions,IEEE Transactions on Power Systems, 22(1), 2007, 314–323.
  18. [18] L. Xu, Coordinated control of DFIG’s rotor and grid sideconverters during network unbalance, IEEE Transactions onPower Electronics, 23(3), 2008, 1041–1049.
  19. [19] L. Xu, Enhanced control and operation of DFIG-based windfarms during network unbalance, IEEE Transactions on EnergyConversion, 23 (4), 2008, 1073–1081.
  20. [20] C.H. Ng, L. Ran, and J. Bumby, Unbalanced-grid-fault ride-through control for a wind turbine inverter, IEEE Transactionson Industry Applications, 44(3), 2008, 845–856.111
  21. [21] C. Fortescue, Method of symmetrical co-ordinates applied tothe solution of polyphase networks, Transactions of AIEE,37(2), 1918, 1027–1140.
  22. [22] Z. Jiang and X. Yu, Active power – voltage control scheme forislanding operation of inverter-interfaced microgrids, Proc. ofIEEE Power Engineering Society General Meeting, 2009.
  23. [23] P. Vas, Electrical machines and drives: a space-vector theoryapproach, (Oxford, UK: Clarendon, 1992).
  24. [24] H. Akagi, Y. Kanazawa, and A. Nabae, Instantaneous reac-tive power compensators comprising switching devices withoutenergy storage components, IEEE Transactions on IndustryApplications, IA-20(3), 1984, 625–630.
  25. [25] X. Wu, S. Panda, and J. Xu, Analysis of the instantaneouspower flow for three-phase PWM boost rectifier under un-balanced supply voltage conditions, IEEE Transactions onIndustrial Electronics, 23(4), 2008, 1679–1691.
  26. [26] L. Xu and W. Cheng, Torque and reactive power control of adoubly fed induction machine by position sensorless scheme,IEEE Transactions on Industry Applications, 31(3), 1995,636–642.
  27. [27] IEEE Standard 399–1997, Recommended practice for industrialand commercial power system analysis, Technical report.
  28. [28] Manitoba HVDC Research Center, PSCADTM electromagnetictransients user’s guide, Technical report, 2005.

Important Links:

Go Back