ULTRA HIGH-SPEED AND LOW-POWER FLEXIBLE ARCHITECTURE USING STATE TRANSITION MATRIX MODEL FOR EPC GEN-2 COMMUNICATION PROTOCOL PROCESSOR

Ajay Ogirala, Vyasa Sai, Akram Kamrani, Jayant Rajgopal, Bryan A. Norman, Peter J. Hawrylak, and Marlin H. Mickle

References

  1. [1] S. Dhawan, Analogy of promising wireless technologies ondifferent frequencies: Bluetooth, WiFi, and WiMAX, TheSecond International Conf. on Wireless Broadband and UltraWideband Communications (AusWireless 2007), 2007, 14,27–30.
  2. [2] E.H. Qi, M. Meylemans, and M. Hattig, Augmenting wirelessLAN technology for Wi-Fi PAN, Signals, Systems and Com-puters, 2009 Conference Record of the Forty-Third AsilomarConference on, 2009, 321–324, 1–4.
  3. [3] IEEE Standard for Informationt Technology – Telecommuni-cation and information exchange between systems – Local andmetropolitan area networks – Specific requirements. Part 11:Wireless LAN Medium Access Control (MAC) and PhysicalLayer (PHY) Specifications, 2007.
  4. [4] EPC Radio-Frequency Identity Protocols Class-1 Generation-2 UHF RFID Protocols for Communications at 860 MHz–960 MHz, Ver 1.0.9, EPCglobal, 2004.
  5. [5] ISO/IEC 18000-6, Information technology – Radio frequencyidentification for item management – Part 6: Parameter forair interface communications at 860 to 960 MHz, 2010.
  6. [6] Phase IV Engineering Inc., Document Number 61-100015-00Rev2.1, Innovative Wireless Sensing, Wireless Sensor Overview2010. Available online at: http://www.phaseivengr.com/203p4main/LinkClick.aspx?fileticket=mKTdbJeUenY%3d&tabid=159&mid=908.
  7. [7] M.H. Mickle, P.J. Hawrylak, R.R. Hoare, A. Jones, J.T.Cain, C. Oyolu, and S. Tung, Methods and apparatus forreducing power consumption of an active transponder, USPatent 7,375,637 B2, 2008.
  8. [8] M.H. Mickle, A.K. Jones, J.T. Cain, P.J. Hawrylak, F. Marx,and R.R. Hoare, Methods and apparatus for switching atransponder to an active state, and asset management systemsemploying same, US Patent 7,876,225 B2, 2011.
  9. [9] M.H. Mickle, P.J. Hawrylak, R.R. Hoare, A. Jones, J.T.Cain, C. Oyolu, and S. Tung, Methods and apparatus forreducing power consumption of an active transponder, USPatent 7,525,436 B2, 2009.
  10. [10] ISO 18000-2, Information technology – Radio frequency iden-tification for item management – Part 2: Parameters for activeair interface communications below 135 kHz, 2009.
  11. [11] ISO 18000-3, Information technology – Radio frequency iden-tification for item management – Part 3: Parameters for activeair interface communications at 13.56 MHz, 2008.
  12. [12] A. Ogirala, A. Murari, P.J. Hawrylak, and M.H. Mickle,Execution time analysis of a Gen-2 remote computer, Journalof Computer Technology and Applications, David PublishingCompany, 2(2), 2011, 94–101.
  13. [13] V. Sai, A. Ogirala, and M.H. Mickle, Low-power data drivensymbol decoder for a UHF passive RFID tag, Journal of LowPower Electronics, 7(5), 2011, 58–62.
  14. [14] V. Sai, A. Ogirala, and M.H. Mickle, Low power RFID designusing custom asynchronous passive computer, Journal of LowPower Electronics, 6(4), 2010, 545–550.
  15. [15] J. Wang, E.C. Wong, and T. Ye, PGMAP: A privacy guaranteedmutual authentication protocol conforming to EPC Class 1Gen 2 Standards, e-Business Engineering, 2008. ICEBE’08.IEEE International Conf. on, 2008, 289–296, 22–24.
  16. [16] S.K. Ravilla, A. Ogirala, A. Murari, P.J. Hawrylak, andM.H. Mickle, Anti-collision policy for RFID systems: Fastpredict tags in field algorithm, International Journal of RadioFrequency Identification Technology and Applications, 3(3),2011, 215–228.
  17. [17] Arizona State University, Predictive technology model (PTM),Available online at: http://ptm.asu.edu/.
  18. [18] A.S.W. Man, E.S. Zhang, V.K.N. Lau, C.Y. Tsui, and H.C.Luong, Low power VLSI design for a RFID passive tag basebandsystem enhanced with an AES cryptography engine, RFIDEurasia, 2007 First Annual, 2007, 1–6, 5–6.
  19. [19] J.C.S. Palma, C. Marcon, F. Hessel, E. Bezerra, G. Rohde,L. Azevedo, C. Reif, and C. Metzer, A passive 915 MHzUHF RFID tag, Ninth International Symposium on QualityElectronic Design, 2008.
  20. [20] Y. Hong, C.F. Chan, J. Guo, Y.S. Ng, W. Shi, L.K. Leung,K.N. Leung, C.S. Choy, and K.P. Pun, Design of passive UHFRFID tag in 130 nm CMOS technology, Circuits and Systems,2008. APCCAS 2008. IEEE Asia Pacific Conference on, 2008,1371–1374.
  21. [21] K. Aisaka, T. Aritsuka, S. Misaka, K. Toyama, K. Uchiyama,K. Ishibashi, H. Kawaguchi, and T. Sakurai, Design rule forfrequency–voltage cooperative power control and its applicationto an MPEG-4 decoder, VLSI Circuits Digest of TechnicalPapers, 2002. Symposium on, 2002, 216–217.

Important Links:

Go Back