Ancai Zhang, Jinhua She, Jianlong Qiu, Chaomin Luo, Chengdong Yang, and Fawaz E. Alsaadi
[1] M.W. Spong, The swing up control problem for the Acrobot,IEEE Control Systems Magazine, 15(1), 1995, 49–55. [2] A. Khalaji and S. Moosavian, Switching control of a tractor-trailer wheeled robot. International Journal of Robotics andAutomation, 30(2), 2015, 1–9. [3] J. Smith, Galloping in an underactuated quadrupedal robot,International Journal of Robotics and Automation, 30(4), 2015,322–332. [4] C. Bechlioulis, G. Karras, S. Heshmati-Alamdari, and K. Kyriakopoulos, Trajectory tracking with prescribed performancefor underactuated underwater vehicles under model uncertain-ties and external disturbances, IEEE Transactions on ControlSystems Technology, 25(2), 2017, 429–440. [5] R. Naldi, M. Furci, R. Sanfelice, and L. Marconi, Robust globaltrajectory tracking for underactuated VTOL aerial vehiclesusing inner-outer loop control paradigms, IEEE Transactionson Automatic Control, 62(1), 2017, 97–112. [6] R. Carpenter, R. Hatton, and R. Balasubramanian, Compari-son of contact capabilities for underactuated parallel jaw grippers for use on industrial robots, Proc. of ASME Int. Conf.on Design Engineering Technical and Computers Information,New York, NY, USA, 2014, 1–9. [7] Z. Dong, L. Wan, Y. Li , L. Zhang, and G. Zhang, Blockbackstepping stabilization control of underactuated USV inpolar coordinate system, Journal of Traffic and TransportationEngineering, 15 (4), 2015, 61–68. [8] X. Xin, J. She, T. Yamasaki, and Y. Liu, Swing-up controlbased on virtual composite links for n-link underactuated robotwith passive first joint, Automatica, 45(9), 2009, 1986–1994. [9] N. Sun, Y. Fang, H. Chen, and B. Lu, Amplitude-saturatednonlinear output feedback antiswing control for underactuatedcranes with double-pendulum cargo dynamics, IEEE Transactions on Industrial Electronics, 64(3), 2017, 2135–2146. [10] A. Zhang, J. Qiu, C. Yang, and H. He, Stabilization ofunderactuated four-link gymnast robot using torque-coupledmethod, International Journal of Non-Linear Mechanics, 77,2015, 299–306. [11] H. Asl, G. Oriolo, and H. Bolandi, An adaptive schemefor image-based visual servoing of an underactuated UAV,International Journal of Robotics and Automation, 29(1), 2014,92–104. [12] X. Xin, S. Tanaka, J. She, and T. Yamasaki, New analyticalresults of energy-based swing-up control for the Pendubot,International Journal of Non-Linear Mechanics, 52, 2013,110–118. [13] X. Xin and M. Kaneda, Analysis of the energy-based swing-upcontrol of the Acrobot, International Journal of Robust andNonlinear Control, 17(16), 2007, 1503–1524. [14] A. Zhang, X. Lai, M. Wu, and J. She, Stabilization of under-actuated two-link gymnast robot by using trajectory trackingstrategy, Applied Mathematics and Computation, 253, 2015,193–204. [15] X. Lai, J. She, S. Yang, and M. Wu, Comprehensive unified control strategy for underactuated two-link manipulators,IEEE Transactions on Systems, Man, and Cybernetics, PartB: Cybernetics, 39(2), 2009, 389–398. [16] M. Spong, P. Corke, and R. Lozano, Nonlinear control of thereaction wheel pendulum, Automatica, 37(11), 2001, 1845–1851. [17] H.K. Khalil, Nonlinear systems, 3rd ed. (Englewood, NJ:Prentice Hall, 2002). [18] G. Oriolo and Y. Nakamura, Control of mechanical systemswith second-order nonholonomic constraints: underactuatedmanipulators, Proc. of the 30th IEEE Conf on Decision andControl, Brighton, UK, 1991, 2398–2403. [19] V. Hern´andez and H. Sira-Ram´ırez, Generalized PI control forswinging up and balancing the inertia wheel pendulum, Proc.of American Control Conf., Denver, 2003, 2809–2814. [20] V. Hern´andez and H. Sira-Ram´ırez, A combined sliding mode-generalized PI control scheme for swinging up and balancingthe inertia wheel pendulum, Asian Journal of Control, 5(4),2003, 620–625. [21] R. Ortega, M.W. Spong, F. G´omez-Estern, and G. Blanken-stein, Stabilization of a class of underactuated mechanicalsystems via interconnection and damping assignment, IEEETransactions on Automatic Control, 47(8), 2002, 1218–1232. [22] H. Ye, S. Peng, W. Gui, and C. Yang, Stabilization of theinertia wheel pendulum by time-delayed state feedback, Proc.of the 26th Chinese Control Conf., Zhangjiajie, China, 2007,23–27. [23] A. Zhang, C. Yang, S. Gong, and J. Qiu, Nonlinear stabilizingcontrol of underactuated inertia wheel pendulum based oncoordinate transformation and time-reverse strategy, NonlinearDynamics, 84(4), 2016, 2467–2476. [24] N. Qaiser, S. Tariq, N. Haq, and T. Aziz, Stabilization of aninertia wheel pendulum using an implicit controller design,WSEAS Transactions on Systems and Control, 7(5), 2010,591–600. [25] J. She, A. Zhang, X. Lai, and M. Wu, Global stabilizationof 2-DOF underactuated mechanical systems—an equivalent-input-disturbance approach, Nonlinear Dynamics, 69(1–2),2012, 495–509. [26] L. Praly, R. Ortega, and G. Kaliora, Stabilization of nonlinearsystems via forwarding mod{LgV }, IEEE Transactions onAutomatic Control, 46(9), 2001, 1461–1466. [27] N. Sun, Y. Fang, and H. Chen, A novel sliding mode controlmethod for an inertia wheel pendulum system, Proc. of Int.Workshop on Recent Advances in Sliding Modes (RASM),Istanbul, Turkey, 2015, 1–6. [28] N. Qaiser and N. Iqbal, Exponential stabilization of the inertiawheel pendulum using surface control, Journal of Circuits,Systems, and Computers, 16(1), 2007, 81–92. [29] C. Xia. Modem control theory, 2nd ed. (Beijing: Science Press,2016) (in Chinese). [30] J. Zhang, X. Xin, and H. Xu, Output feedback control of aclass of linear time-varying systems, Acta Automatica Sinica,40(2), 2014, 373–378 (in Chinese). [31] Y. Fu and J. Lin, Nonlinear backstepping control design of thefuruta pendulum, Proc of the 2005 IEEE Conf. on ControlApplications, Toronto, Canada, 2005, 96–101. [32] N. Muˇskinja and B. Tovornik, Swinging up and stabilizationof a real inverted pendulum, IEEE Transactions on IndustrialElectronics, 53(2) 2006, 631–639. [33] X. Lai, J. She, S.X. Yang, and M. Wu, Control of Acrobotbased on non-smooth Lyapunov function and comprehensivestability analysis, IET Control Theory and Applications, 2(3),2008, 181–191.
Important Links:
Go Back