DESIGN OF ROBUST FAULT DETECTION FILTERS FOR MULTIVARIABLE FEEDBACK SYSTEMS

A. Zolghadri, F. Castang, and D. Henry

References

  1. [1] J. Chen & R.J. Patton, Robust model-based fault diagnosis fordynamic systems (MA: Kluwer Academic Publishers, 1999).
  2. [2] R.S. Mangoubi, Robust estimation and failure detection: Aconcise treatment (Berlin, Heidelberg, New York: Springer-Verlag, 1998).
  3. [3] A. Edelmayer, J. Bokor, F. Szigeti, & L. Keviczky, Robustdetection filter design in the presence of time varying pertur-bations, Automatica, 33 (3), 1997, 471–475. doi:10.1016/S0005-1098(96)00189-6
  4. [4] H. Niemann & J. Stoustrup, Multiobjective design techniquesapplied to fault detection and isolation, Proc. American ControlConf., ACC’98, Philadelphia, PA, 1998, 2022–2026.
  5. [5] J. Chen & R.J. Patton, Optimal residual design for faultdiagnosis using multi-objective optimisation and genetic algo-rithms, International Journal of Systems Science, 27 (6), 1996,567–576. doi:10.1080/00207729608929251
  6. [6] H. Niemann & J. Stoustrup, Filter design for failure detec-tion and isolation in the presence of modelling errors anddisturbances, CDC, Kobe, Japan, 1996, 1155–1160.
  7. [7] J. Bokor & G. Balas, Detection filter design for LPV systems:A geometric approach, Automatica, 40, 2004, 511–518. doi:10.1016/j.automatica.2003.11.003
  8. [8] J. Stoustrup & M.J Grimble. Integrated control and faultdiagnosis: A separation result, Safeprocess’97, Hull, England,1997, 323–328.
  9. [9] J. Stoustrup, M.J Grimble, & H. Niemann, Design of integratedsystems for the control and detection of actuator/sensor faults,Sensor Review, 17 (2), 1997, 138–149. doi:10.1108/02602289710170311
  10. [10] M.K.H Fan, A.L. Tits, & J.C. Doyle, Robustness in the presenceof mixed parametric uncertainty and unmodeled dynamics,IEEE Trans. on Automatic Control, 6 (1), 1991, 25–38. doi:10.1109/9.62265
  11. [11] M.P Newlin & R.S. Smith, A generalization of the structuredvalue and its application to model validation, IEEE Trans. onAutomatic Control, 43 (7), 1998, 901–907. doi:10.1109/9.701088
  12. [12] J. Doyle, K. Glover, P. Khargonekar, & B. Francis, State-spacesolutions to standard H2 and H∞ control problems, IEEETrans. on Automatic Control, 34, 1989, 831–847. doi:10.1109/9.29425
  13. [13] K. Zhou, J.C Doyle, & K. Glover, Robust and optimal control(New Jersey: Prentice-Hall, 1995).
  14. [14] A. Saberi, A. Stoorvogel, & P. Sannuti, Exact, almost andoptimal input decoupled (delayed) observers, InternationalJournal of Control, 73 (7), 2000, 552–581. doi:10.1080/002071700219425
  15. [15] M.L Rank & H. Niemann, Norm based design of fault detectors,International Journal of Control, 72 (9), 1999, 773–783. doi:10.1080/002071799220704
  16. [16] C. Scherer, P. Gahinet, & M. Chilali, Multiobjective output-feedback control via LMI optimization, IEEE Trans. on Auto-matic Control, 42 (7), 1997, 893–911. doi:10.1109/9.599969
  17. [17] D. Henry, A. Zolghadri, M. Monsion, & S. Ygorra, Offlinerobust fault diagnosis using the generalised structured singularvalue, Automatica, 38 (8), 2002, 1347–1358. doi:10.1016/S0005-1098(02)00026-2
  18. [18] J.F Magni, S. Bennani, & J. Terlouw, Robust flight control: Adesign challenge, in Lecture Notes in Control and InformationSciences, No. 224, Springer Verlag, 1997.

Important Links:

Go Back