DESIGN OF SIMULTANEOUS PERIODIC OUTPUT FEEDBACK CONTROL FOR SMART STRUCTURES

M. Umapathy and B. Bandyopadhyay

References

  1. [1] I. Chopra, Review of state of art of smart structures andintegrated systems, AIAA Journal, 40(11), 2002, 2145–2182.
  2. [2] J.K. Durr, U.H. Schmidt & H.W. Zagauer, On the integrationof piezoceramic actuators in composite structures for aerospaceapplications, Journal of Intelligent Material Systems, 10, 1999,880–889.
  3. [3] M.H.H. Shen, Analysis of beams containing piezoelectric sen-sors and actuators, Smart Materials, Structures, 3, 1994,439–447.
  4. [4] W. Hwang & H.C. Park, Finite element modeling of piezo-electric sensors and actuators, AIAA Journal, 31(5), 1993,930–937.
  5. [5] S.M. Yang & Y.J. Lee, Optimization of non-collocated sen-sor/actuator location and feedback gain in control systems,Smart Materials, Structures, 8, 1993, 96–102.
  6. [6] H. Allik & T.J.R. Hughes, Finite element method for piezoelec-tric vibration, International Journal for Numerical Methodsin Engineering, 2, 1970, 151–157.
  7. [7] R.C. Shieh, Governing equations and finite element modelsfor multiaxial piezoelectric beam sensors/actuators, AIAAJournal, 32(6), 1994, 1250–1258.
  8. [8] Y.-H. Lim, V.V. Varadan, & V.K. Varadan, Closed loop finiteelement modeling of active structural damping in the timedomain, Smart Materials, Structures, 8, 1999, 390–400.
  9. [9] S. Narayanan & V. Balamurugan, Finite element modeling ofpiezolaminated smart structures for active vibration controlwith distributed sensors and actuators, Journal of Sound andVibration, 262(5), 2003, 529–562.44
  10. [10] S.M. Yang & Y.J. Lee, Modal analysis of stepped beamswith piezoelectric materials, Journal of Sound and Vibration,176 (3), 1994, 289–300.
  11. [11] S. Hanagud, M.W. Obal, & A.J. Callise, Optimal vibrationcontrol by the use of piezoceramic sensors and actuators,Journal of Guidance, Control, and Dynamics, 15(5), 1992,1199–1206.
  12. [12] S.M. Yang & Y.J. Lee, Vibration suppression with optimalsensor/actuator location and feedback gain, Smart Materials,Structures, 2, 1993, 232–239.
  13. [13] O.J. Aldraihem, T. Singh, & R.C. Wetherhold, Optimal sizeand location of piezoelectric actuator/sensors: Practical con-siderations, Journal of Guidance, Control, and Dynamics,23 (3), 2000, 509–515.
  14. [14] S. Devasia, T. Meressi, B. Paden, & E. Bayo, Piezoelectricactuator design for vibration suppression: Placement andsizing, Journal of Guidance, Control, and Dynamics, 6(5),1993, 859–864.
  15. [15] E. Emre, Simultaneous stabilization with fixed closed loopcharacteristics polynomial, IEEE Trans. on Automatic Control,28 (1), 1983, 103–104.
  16. [16] B.K. Ghosh & C.I. Byrnes, Simultaneous stabilization andsimultaneous pole placement by non-switching dynamic com-pensation, IEEE Trans. on Automatic Control, 20(6), 1983,735.
  17. [17] M. Vidyasagar & N. Viswanadham, Algebraic design techniquesfor reliable stabilization, IEEE Trans. on Automatic Control,24(3), 1986, 480–496.
  18. [18] H. Werner & K. Furuta, Simultaneous stabilization based onoutput measurements, Kybernetika, 31(4), 1995, 395–411.
  19. [19] H. Werner & K. Furuta, Simultaneous stabilization by piece-wise constant periodic output feedback, Control Theory andAdvanced Technology, 10(4), 1995, 1763–1775.
  20. [20] J.C. Geromel, P.L.D. Peres, & J. Bernussou, On a convexparameter space method for linear control design of uncertainsystems, SIAM Journal of Control and Optimization, 26(1),1991, 381–402.
  21. [21] K.-J. Bathe, Finite element procedures (Englewood Cliffs, NewJersey: Prentice Hall, 1996).
  22. [22] M. Umapathy & B. Bandyopadhyay, Vibration control offlexible beam through smart structure concept using periodicoutput feedback, System Science Journal, 26(1), 2000, 43–66.

Important Links:

Go Back