VOLTAGE DISTRIBUTION OF STEEP FRONTED TRANSIENTS IN STATOR WINDINGS – MODELLING, SIMULATION AND EXPERIMENTAL VERIFICATION

D.V.S.S. Siva Sarma,∗ B. Basavara ja,∗∗ C. Venkataseshaiah,∗∗∗ and S.S. Yegnanarayanan∗∗∗∗

References

  1. [1] G. Suresh, H.A. Toliyat, D.A. Rendussara, & P.N. Enjeti,Predicting the transient effects of PWM voltage waveform onthe stator windings of random wound induction motors, IEEETransactions on Power Electronics, 14(1), 1999, 23–30.
  2. [2] K.J. Cornick & T.R. Thompson, Steep fronted switching voltagetransients and their distribution in motor windings, Part-2:distribution of steep fronted switching voltage transients instator windings, IEE Proceedings, Part.B, 129(2), 1982, 45–55.
  3. [3] C. Petrarca & V. Tucci, Analysis of the voltage distributionin a motor stator windings subjected to steep fronted surgevoltages by means of multi-conductor lossy transmission linemodel, IEEE Transactions on Energy Conversion, 19(1), 2004,7–17.
  4. [4] Narang et al., Measurement and analysis of surge distribu-tion in motor stator windings, IEEE Transactions on EnergyConversion, 4(1), 1989, 126–134.
  5. [5] J.L. Guardado & K.J. Cornick, A computer model for calcu-lating steep fronted surge distribution in machine windings,IEEE Transactions on Energy Conversion, 4(1), 1989, 95–101.
  6. [6] L. Gubbala, A. Von Jouanne, P.N. Enjeti, C. Singh, & H.Toliyat, Voltage distribution in the winding of an AC motorsubjected to high dv/dt PWM voltages, IEEE PESC Confer-ence Proceedings, Atlanta, GA, USA, 1995, 579–585.
  7. [7] J.L. Guardado & K.J.A. Cornick, Computer model for calculat-ing steep fronted surge distribution in machine windings, IEEETransactions on Energy Conversions, 4(1), 1989, 95–101.
  8. [8] J.L. Guardado & K.J. Cornick, Calculation of machine electricalparameters at high frequencies for switching transient studies,IEEE Transactions on Energy Conversions, 11(1), 1996, 33–40.
  9. [9] B.K. Gupta, M. Kurtz, G.C. Stone, & D.K. Sharma, Impulsestrength of high voltage motor coil turn insulation, IEEETransactions on Energy Conversions, 1(4), 1986, 130–134.
  10. [10] B.K. Gupta, D.K. Sharma, & D.C. Bacvarov, Measured prop-agation of surges in the winding of a large AC motor, IEEETransactions on Energy Conversions, 1(1), 1986, 122–129.
  11. [11] G. Lupo, C. Petrarca, M. Vitelli, & V. Tucci, Multi-conductortransmission line analysis of steep-front surges in machinewindings, IEEE Transactions on Dielectrics and ElectricalInsulation, 9(3), 2002, 467–478.
  12. [12] R.S. Dhariwal & S.J. Yang, Testing of electrical machine statorcoils using sharp-fronted impulse voltage, IEEE Transactionson Electrical Insulation, 19(4), 1994, 350–352.
  13. [13] B.S. Oyegoke, Effect of the overhand capacitance on fast-risingsurge distribution in winding of a large AC motor, IEEEProceedings on Science, Measurement and Technology, 146(6),1999, 299–303.
  14. [14] S. Islam & G. Ledwich, An equivalent circuit for calculationof interturn voltage distribution of stator windings in thepresence of slot discharges, Proc. 5th Int. Conf. on Propertiesand Applications of Dielectric Materials, Seoul, Korea, 1997,507–510.277
  15. [15] P. Bidan, T. Lebey, G. Montseny, C. Neacsu, & J.S.- Michel,Transient voltage distribution in inverter fed motor wind-ings: experimental study and modeling, IEEE Transactionson Power Electronics, 16(1), 2001, 92–100.
  16. [16] M. Fenger, S.R. Campbell, & J. Pedersen, Motor windingproblems caused by inverter drives, IEEE Industry ApplicationsMagazine, 9, 2003, 22–31.
  17. [17] S. Lee & K.H. Nam, Overvoltage suppression filter designmethods based on voltage reflection theory, IEEE Transactionson Power Electronics, 19(2), 2004, 264–271.
  18. [18] D.-H. Hwang, K.-C. Lee, Y.-J. Kim, Y.-J. Lee, M.-H. Kim, &D.-H. Kim, Analysis of voltage distribution in stator windingof IGBT PWM inverter-fed induction motors, IEEE ISIE,Dubrovnik, Croatia, 2005, 945–950.
  19. [19] T. Humiston & P. Pillay, Parameter measurements to studysurge propagation in induction machines, IEEE Transactionson Industry Applications, 40(5), 2004, 1441–1348.
  20. [20] E.P. Dick (M), B.K. Gupta (SM), P. Pillai, & A. Narang (M),Equivalent circuits for simulating switching surges at motorterminals, IEEE Transactions on Energy Conversion, 3(3),2004, 696–703.
  21. [21] F. Wen, L. Tong, G. Wu, & T. Deng, Analysis of voltagewaveform at the stator terminal of PWM inverter fed motors,Proc. 2005 Int. Symposium on Electrical Insulating Materials,Kitakyushu, Japan, 2005, 382–385.

Important Links:

Go Back