MODELLING, CONTROL AND SIMULATION OF A SIX-DOF MOTION PLATFORM FOR A FLIGHT SIMULATOR

Umar Asif and Javaid Iqbal

References

  1. [1] D.L. Pisla, N. Plitea, A. Pisla, I. Stoian, E. Stancel, B.Z.Gyurka, and A. Tepes, A simulation control interface forrobotic structures used as flight simulators, Proc. IEEE Int.Conf. on Automation, Quality and Testing, Robotics, 02, 2008.
  2. [2] D. Wu, H. Gu, and P. Li, Comparative study on dynamicidentification of parallel motion platform for a novel flightsimulator, Proc. IEEE Int. Conf. on Robotics and Biomimetics,Guilin, China, 2009.
  3. [3] P. Renaud, A. Vivas, N. Andreff, Kinematic and dynamic iden-tification of parallel mechanisms, Control Engineering Practice,14 (19), 1099–1109, September 2006.
  4. [4] Gosseli and Nahon M.A., A comparison of flight simula-tor motion–base architectures. Journal of Mechanical Design,122 (3), 2000.
  5. [5] A. Pisla, N. Plitea, and B. Prodan, Modeling and simulationof parallel structures used as flight simulators, Proc. Trendsin the Development of Machinery and Associated Technology,Tunisia, 2007.
  6. [6] K.-Y. Tu, T.-C. Wu, and T.-T. Lee, A study of stewart platformspecifications for motion cueing system, Proc. IEEE Int. Conf.on Systems, Man and Cybernetics, 2004.
  7. [7] B. Dasgupta and T.S. Mruthyunjaya, Closed-form dynamicequations of the general Stewart platform though the Newton-Euler approach, Mechanism and Machine Theory, 33 (7), 1998,993–1012.
  8. [8] Y.S. Chiew, M.K. Abdul Jalil, and Hussein, Kinematic model-ing of driving simulator motion platform, Proc. IEEE Conf. onInnovative Technologies in Intelligent Systems and IndustrialApplications Multimedia University, Malaysia, 2008.
  9. [9] Chiew Y.S., M.K. Abdul Jalil, and M. Hussein, Motion visu-alization and control of a driving simulator motion platform,Proc. 6th Int. Symposium on Mechatronics and Its Applications(ISMA09), Sharjah, UAE, 2009.
  10. [10] F. Pernkopf and M.L. Husty, Workspace analysis of stewart-gough-type parallel manipulators, Journal of Mechanical En-gineering Science, 220, 2006, 1019–1032.
  11. [11] C. Gosselin and J. Angeles, Singularities analysis of closed loopkinematic chains, Proceedings IEEE Transactions on Roboticsand Automation, 6 (3), 1990, 281–290.
  12. [12] D. Kim and W. Chung, Analytic singularity equation andanalysis of six DOF parallel manipulators using structurizationmethod, Proceedings of IEEE Transactions on Robotics andAutomation, 15 (4), 1999.
  13. [13] C.M. Gosselin and J. Angeles, Singularity analysis of closed-loop kinematic chains, Proceeding of IEEE Transactions onRobotics and Automation, 6, 1990, 281–290.
  14. [14] Z. Yang, J. Wu, J. Mei, J. Gao, and T. Huang, Mechatronicmodel based computed torque control of a parallel manipulator,International Journal of Advanced Robotic Systems, 5 (1), 2008,123–128.
  15. [15] K. Liu, J.M. Fitzgerald, and F.L. Lewis, Kinematic analysisof a stewart platform manipulator, Proceedings of the IEEETransactions on Industrial Electronics, 40 (2), 1993.
  16. [16] U. Asif and J. Iqbal, Modeling and simulation of biologicallyinspired hexapod robot using SimMechanics, Proc. IASTEDInt. Conf. Robotics (Robo 2010), November 24–26, Phuket,Thailand, 128–135.
  17. [17] B. Dasgupta and T.S Mruthyunjaya, A Newton–Euler formu-lation for the inverse dynamics of the Stewart Platform ma-nipulatr, Mechanism and Machine Theory, 33 (8), 1135–1152.
  18. [18] B. Dasgupta and T.S. Mruthyunjaya, Closed-form dynamicequations of the general Stewart platform through the Newton–Euler approach, Mechanism and Machine Theory, 33 (7), 1998,993–1012.
  19. [19] G. Wang, L. Zhang, D. Chen, D. Liu, and X. Chen, Modelingand simulation of multi-legged walking machine prototype-icmtma, International Conference on Measuring Technologyand Mechatronics Automation, 2, 2009, 251–254.Proc. Int. Conf. on Measuring Technology and MechatronicsAutomation, 2007.
  20. [20] T.T. Lee, C.M. Liao, and T.K. Chen, On the stability propertiesof hexapod tripod gait, Proceedings of the IEEE Journal ofRobotics and Automation, 4(4), 1988, 427–434.320

Important Links:

Go Back