APPLICATION OF FUZZY HESITATION MODEL IN THE OPTIMISATION OF MECHANICAL PROCESS PARAMETERS

Xiaoqing Zhou, Zhimin Wan, and Ting Wang

References

  1. [1] J.D. Kechagias, N. Vidakis, and M. Petousis, Parametereffects and process modeling of FFF-TPU mechanicalresponse, Materials and Manufacturing Processes, 38(3), 2023,341–351.
  2. [2] F. Burcea, A. Herrmann, B. Li, and H. Graeb, MEMS-ICrobustness optimization considering electrical and mechanicaldesign and process parameters, ACM Transactions on DesignAutomation of Electronic Systems, 24(4), 2019, 43.
  3. [3] J. Retolaza, K. Gondra, R. Ansola, and A. Allue, Mechanicalresearch to optimize parameter selection for PPS materialprocessed by FDM, Materials and Manufacturing Processes,37(11), 2022, 1332–1338.
  4. [4] S.H. Hosseini and M. Sedighi, Process parameter effects onmicrostructure and mechanical properties of tubes processedvia friction assisted tube straining method, Journal of CentralSouth University, 28(10), 2021, 3008–3017.
  5. [5] Y.Z. Zhang, M. Gao, and X.Y. Zeng, Effect of pro-cess parameters on mechanical properties of wire andarc additive-manufactured AlCu6Mn, JOM, 71(3), 2019,886–892.
  6. [6] B.F. Liu, L. Yang, R. Zhou, and B. Hong, Effect of processparameters on mechanical properties of additive manufacturedSMP structures based on FDM, Materials Testing, 64(3), 2022,378–390.
  7. [7] M. Kam, A. Ipek¸ci, and ¨O Seng¨ul, Taguchi optimization offused deposition modeling process parameters on mechanicalcharacteristics of PLA plus filament material, Scientia Iranica,29(1), 2022, 79–89.
  8. [8] K. Wafaie, H. Mohammed, A.M. El Sergani, I. Almagrami,A.G. Qaisi, and Q. Yiqiang, Analysis and optimization of FFFprocess parameters to enhance the mechanical properties of3D printed PLA products, Australasian Orthodontic Journal,39(1), 2023, 42–48.
  9. [9] T. Sheikh and K. Behdinan, The effect of process parameterson the mechanical properties of additively manufactured partsusing a hierarchical multiscale model, Rapid PrototypingJournal, 29(5), 2023, 1029–1043.
  10. [10] A. Bacciaglia, A. Ceruti, and A. Liverani, Controllablepitch propeller optimization through meta-heuristic algorithm,Engineering With Computers, 37(3), 2021, 2257–2271.
  11. [11] K. Rezvani, A. Gaffari, and M.R.E. Dishabi, The bedbug meta-heuristic algorithm to solve optimization problems, Journal ofBionic Engineering, 20(5), 2023, 2465–2485.
  12. [12] B. Boazzo, G. Pellegrino, and A. Vagati, Multipolar SPMmachines for direct-drive application: A general designapproach, IEEE Transactions on Industry Applications, 50(1),2014, 327–337.
  13. [13] S. Mondal and C. Mhanta, Adaptive integral higherorder sliding mode controller for uncertain systems,Journal of Control Theory Application, 1(61), 2013,61–68.
  14. [14] P.L. Shyamsundar, P.L. Rishi, and P.L. Jamuna, LQR basedfuzzy logic rudder control system using DC servomotor,Proc. 5th International Conf. on Advanced ComputingCommunication Systems (ICACCS), Coimbatore, India, 2019,124–127.
  15. [15] A.R. Nasser, A.T. Azar, A.J. Humaidi, A.K. Al-Mhdawi, andI.K. Ibraheem, Intelligent fault detection and identificationapproach for analog electronic circuits based on fuzzy logicclassifier, Electronics, 10(23), 2021, 2888.
  16. [16] H. Kantrong, C. Charunuch, N. Limsangouan, and W.Pengpinit, Influence of process parameters on physicalproperties and specific mechanical energy of healthy mushroom-rice snacks and optimization of extrusion process parametersusing response surface methodology, Journal of Food Scienceand Technology-Mysore, 55(9), 2018, 3462–3472.
  17. [17] M. Samiuddin, J.L. Li, M. Taimoor, M.N. Siddiqui, S.U.Siddiqui, and J.T. Xiong, Investigation on the processparameters of TIG-welded aluminum alloy through mechanicaland microstructural characterization, Defence Technology,17(4), 2021, 1234–1248.
  18. [18] M. Idriss, F. Mirakhorli, A. Desrochers, and A. Maslouhi, Over-lap laser welding of 5052-H36 aluminum alloy: Experimentalinvestigation of process parameters and mechanical designs,International Journal of Advanced Manufacturing Technology,119(11–12), 2022, 7653–7667.
  19. [19] W.F. Yuan, X.G. Zheng, and N.M. Shahani, Optimization ofindirect fracturing process parameters based on mechanicalproperties of fractured and low-permeability coal, Geofluids,2022, 2022, 7436051.
  20. [20] H.Q. Liu, H.A. Ma, C.X. Wang, F. Wang, B.M. Liu, and J.X.Chen, Enhanced thermoelectric properties of nonstoichiometricTiO1.76 with excellent mechanical properties induced byoptimizing processing parameters, Ceramics International,44(16), 2018, 19859–19865.
  21. [21] Y.A. Wang, L.S. Luo, T. Liu, B.B. Wang, L. Luo, and J.H.Zhao, Tuning process parameters to optimize microstructureand mechanical properties of novel maraging steel fabricated byselective laser melting, Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing,823, 2021, 141740.
  22. [22] Q. Wang, Z.H. Zhang, X. Tong, S.Y. Dong, Z.Q. Cui, and X.Wang, Effects of process parameters on the microstructure andmechanical properties of 24CrNiMo steel fabricated by selectivelaser melting, Optics and Laser Technology, 128, 2020, 106262.
  23. [23] Y.J. Seo, Methodological consideration on the prediction ofelectrochemical mechanical polishing process parameters bymonitoring of electrochemical characteristics of copper surface,Journal of Electrochemical Science and Technology, 11(4),2020, 346–351.
  24. [24] M. Schubert, M. Lukovic, and H. Christen, Prediction ofmechanical properties of wood fiber insulation boards as afunction of machine and process parameters by random forest,Wood Science and Technology, 54(3), 2020, 703–713.
  25. [25] B.G. Guan, M.L. Guo, Y.F. Qin, and C.J. Liu, Applicationof ant colony algorithm in laser cutting path optimisation ofsheet metal parts, Mechatronic Systems and Control, 51(4),159–165.
  26. [26] M.S. Afsharkohan, S. Dehrooyeh, M. Sohrabian, and M.Vaseghi, Influence of processing parameters tuning andrheological characterization on improvement of mechanicalproperties and fabrication accuracy of 3D printed models,Rapid Prototyping Journal, 29(4), 2023, 867–881.
  27. [27] T.D. McLouth, D.B. Witkin, G.E. Bean, S.D. Sitzman, P.M.Adams, and J.R. Lohser, Variations in ambient and elevatedtemperature mechanical behavior of IN718 manufactured byselective laser melting via process parameter control, MaterialsScience and Engineering A-Structural Materials PropertiesMicrostructure and Processing, 780, 2020, 139184.
  28. [28] V.T. Minh, R. Moezzi, J. Cyrus, and J. Hlava, Fuzzy systemfor clutch engagement and vibration control in parallel hybridelectric vehicle, Mechatronic Systems and Control, 51(1), 2023,25–33.
  29. [29] A. Premnath, Optimization of the process parameters on themechanical and wear properties of Al-SiC nano-compositesfabricated by friction stir processing using desirabilityapproach, Silicon, 12(3), 2020, 665–675.

Important Links:

Go Back