Jialiang Wang,∗ Lidong Lu,∗ Penghao Wu,∗∗ Yiyang Chen,∗∗ Weidong Zhang,∗ and Hongtian Chen∗∗∗
[1] W. Huang, G. Ran, B. Wang, D. Li, and W. Dong,Robust attitude tracking control based on adaptive dynamicprogramming for flexible dumbbell-shaped spacecraft, IEEETransactions on Aerospace and Electronic Systems, 60(2),2024, 2394–2406. [2] X. Yang, M. Moallem, and R. V. Patel, A sensor-basednavigation algorithm for a mobile robot using fuzzy logic,International Journal of Robotics and Automation, 21(2), 2006,129–140. [3] Z. Xu and J.H. Saleh, Machine learning for reliabilityengineering and safety applications: Review of current statusand future opportunities, Reliability Engineering & SystemSafety, 211, 2021, 107530. [4] L. Yan, G. Liu, and Y. Ren, Study on control strategyof bilateral permanent magnet linear motor, Interna-tional Journal of Robotics and Automation, 40(4), 2025,254–262. [5] F. Piltan, N. Sulaiman, M. Rashidi, Z. Tajpaikar, andP. Ferdosali, Design and implementation of sliding modealgorithm: Applied to robot manipulator—A review, Inter-national Journal of Robotics and Automation, 2(5), 2011,265–282. [6] S. Yin, S.X. Ding, X. Xie, and H. Luo, A review on basicdata-driven approaches for industrial process monitoring,IEEE Transactions on Industrial Electronics, 61(11), 2014,6418–6428. [7] H. Chen, B. Jiang, S.X. Ding, and B. Huang, Data-driven fault diagnosis for traction systems in high-speedtrains: A survey, challenges, and perspectives, IEEE Trans-actions on Intelligent Transportation Systems, 23(3), 2020,1700–1716. [8] Q. Zhang, Adaptive Kalman filter for actuator fault diagnosis,Automatica, 93, 2018, 333–342. [9] Q. Fan and K.S. Yen, An improved extended Kalman filterbased on piecewise self-adjusting weighted nonlinear predictivefiltering algorithm for mobile robot positioning and navigation,International Journal of Robotics and Automation, 40(1), 2025,56–64. [10] A.F. Loza, J. Cieslak, D. Henry, J. D´avila, and A. Zolghadri,Sensor fault diagnosis using a non-homogeneous high-ordersliding mode observer with application to a transportaircraft, IET Control Theory & Applications, 9(4), 2015,598–607.12 [11] D. Ossmann and A. Varga, Optimization-based tuning of LPVfault detection filters for civil transport aircraft, in Progressin Flight Dynamics, Guidance, Navigation, Control, FaultDetection, and Avionics, C. Vallet, D. Choukroun, C. Philippe,G. Balas, A. Nebylov, and O. Yanova, Eds. (Les Ulis: EDPSciences, 2013). [12] P. Lu, E. van Kampen, C. C. de Visser, and Q.P. Chu,Framework for simultaneous sensor and actuator fault-tolerantflight control, Journal of Guidance, Control, and Dynamics,40(8), 2017, 2133–2136. [13] H. Yan, L. Yuan, C. Li, Y. Guo, G. Ran, and B.H.Wang, Rapid on-orbit repair mission planning for multipleGEO spacecraft based on a mixed repair strategy, IEEETransactions on Aerospace and Electronic Systems, 61(1), 2024,279–295. [14] Z. Gao, C. Cecati, and S. X. Ding, A survey of fault diagnosisand fault-tolerant techniques—Part I: Fault diagnosis withmodel-based and signal-based approaches, IEEE Transactionson Industrial Electronics, 62(6), 2015, 3757–3767. [15] O. Basir and X. Yuan, Engine fault diagnosis based on multi-sensor information fusion using Dempster–Shafer evidencetheory, Information Fusion, 8(4), 2007, 379–386. [16] S. Yoon and J.F. MacGregor, Fault diagnosis with multivariatestatistical models Part-I: Using steady-state fault signatures,Journal of Process Control, 11(4), 2001, 387–400. [17] D.A. Handelman and R.F. Stengel, Combining expert systemand analytical redundancy concepts for fault-tolerant flightcontrol, Journal of Guidance, Control, and Dynamics, 12(1),1989, 39–45. [18] D. Ossmann, H.-D. Joos, and P. Goupil, Enhanced sensormonitoring to maintain optimal aircraft handling in case offaults, Journal of Guidance, Control, and Dynamics, 40(12),2017, 3127–3137. [19] S. Wan, G. Campa, M. Napolitano, and M.L. Fravolini,On-line learning RBF neural networks for sensor validation,in Proceeding of the AIAA Guidance, Navigation, and ControlConference and Exhibit, Monterey, 2002, 4996. [20] H. Tao, J. Qiu, Y. Chen, V. Stojanovic, and L. Cheng,Unsupervised cross-domain rolling bearing fault diagnosis basedon time-frequency information fusion, Journal of the FranklinInstitute, 360(2), 2023, 1454–1477. [21] R. Liu, B. Yang, E. Zio, and X. Chen, Artificial intelligence forfault diagnosis of rotating machinery: A review, MechanicalSystems and Signal Processing, 108, 2018, 33–47. [22] M. Kidouche and A. Charef, A constructive methodologyof Lyapunov function of composite systems with nonlinearinterconnection term, International Journal of Robotics andAutomation, 21(1), 2006, 19–24. [23] V. Singh, P. Gangsar, R. Porwal, and A. Atulkar, Artificialintelligence application in fault diagnostics of rotating industrialmachines: A state-of-the-art review, Journal of IntelligentManufacturing, 34(3), 2023, 931–960. [24] H. Tao, P. Wang, Y. Chen, V. Stojanovic, and H. Yang, Anunsupervised fault diagnosis method for rolling bearing usingSTFT and generative neural networks, Journal of the FranklinInstitute, 357(11), 2020, 7286–7307. [25] Y. Chen and Y. Zhou, Machine learning based decisionmaking for time varying systems: Parameter estimation andperformance optimization, Knowledge-Based Systems, 190,2020, 105479. [26] H. Chen, Z. Liu, C. Alippi, B. Huang, and D. Liu, Explainableintelligent fault diagnosis for nonlinear dynamic systems:From unsupervised to supervised learning, IEEE Transactionson Neural Networks and Learning Systems, 35, 2024,6166–6179. [27] S. Hu, G. Kong, C. Zhang, J. Fu, S. Li, and Q. Yang, Data-driven models for the steady thermal performance predictionof energy piles optimized by metaheuristic algorithms, Energy,313, 2024, 134000. [28] Y. Kim, M. Lee, J. Hong, Y.-S. Lee, J. Wee, and K. Cho,Development of a fuzzy logic-embedded system dynamicsmodel to simulate complex socio-ecological systems, EcologicalModelling, 493, 2024, 110738. [29] H.R. Patel and V.A. Shah, Fuzzy logic based metaheuristicalgorithm for optimization of type-1 fuzzy controller: Fault-tolerant control for nonlinear system with actuator fault, IFAC-PapersOnLine, 55(1), 2022, 715–721. [30] S. Haykin, Neural Networks and Learning Machines, 3rd ed.(Upper Saddle River, NJ: Prentice Hall, 2010). [31] H. Wu, T. Hu, Y. Liu, H. Zhou, J. Wang, and M. Long,TimesNet: Temporal 2D-variation modeling for general timeseries analysis, 2022, arXiv:2210.02186. [32] S. Ding, Data-driven design of monitoring and diagnosis systemsfor dynamic processes: A review of subspace technique-basedschemes and some recent results, Journal of Process Control,24(2), 2014, 431–449. [33] S. Yin, S. X. Ding, X. Xie, and H. Luo, A review onbasic data-driven approaches for industrial process monitoring,IEEE Transactions on Industrial Electronics, 61(11), 2014,6418–6428. [34] W. Ku, R.H. Storer, and C. Georgakis, Disturbance detectionand isolation by dynamic principal component analysis,Chemometrics and Intelligent Laboratory Systems, 30(1), 1995,179–196. [35] J. Wang and S.J. Qin, A new subspace identification approachbased on principal component analysis, Journal of ProcessControl, 12(8), 2002, 841–855. [36] L. Han, Z. Li, and Y. Huang, Adaptive control of a cable-drivenserpentine manipulator based on neural network observer,International Journal of Robotics and Automation, 40(4), 2025,311–320. [37] B. Li, H. Zhang, and X. Shi, A novel path planning for AUVbased on dung beetle optimisation algorithm with deep Q-network, International Journal of Robotics and Automation,40(1), 2025, 65–73.
Important Links:
Go Back